What is Nika Treatment Trolley?

Nika Treatment Trolley is the mobile service trolley of the NIKA range: a rectangular tray with a raised edge on a height-adjustable central column, a five-arm castor base and two removable holders clipped to the side. It brings bowl, brushes and tubes from the mixing area to the chair and keeps them within reach for the whole colour or treatment service.

The working height is set with a locking knob on the column, for work seated or standing, and the all-black finish keeps colour marks discreet on a piece of equipment that lives inside technical services.

Specifications

Who Nika Treatment Trolley is for

• Colourists who move from the mixing area to the chair with the whole application set on one surface.
• Salons where the mixing area is far from the chairs.
• Long technical services, such as bleaching, colour correction and balayage, where the tools build up as the work progresses.
• Academies and demonstration areas, where the trolley is moved around the model again and again.

Key features

• Tray with raised edge: the lip keeps bowls, tubes and brushes on the tray when the trolley is moved.
• Height-adjustable column: a locking knob sets the working height for seated or standing work.
• Five-arm castor base: five points of support with a castor on each arm, so the trolley rolls round the chair.
• Two removable side holders: cups clipped to the side for brushes, clips or a bottle, leaving the tray surface free.
• All-black finish: it matches the NIKA station tools and keeps colour marks discreet.

How to use Nika Treatment Trolley

1. Set the height before starting, so the tray sits where the hand reaches without lifting the shoulder.
2. Tighten the locking knob fully before loading the tray.
3. Position the trolley on the working side of the chair, within reach without stepping away from the client.
4. Place bowl and tubes on the tray, brushes and clips in the side holders.
5. Keep the heavier items towards the centre of the tray, above the column.
6. Move the trolley by the column or the tray edge, not by the side holders.
7. Empty and wipe it down at the end of each service.

For professionals

• Service: colour, bleaching, colour correction, balayage and care treatments at the chair.
• At the station: Nika Bowl Black and Nika Mixer on the tray, Nika Application Brush and Nika Hair Pin Set in the side holders.
• In rotation: one per colourist working at the same time, so every chair in a technical service has its own set at hand.

FAQ

What comes with Nika Treatment Trolley?

The trolley with its tray, column, castor base and the two removable side holders; bowls, brushes and products are sold separately.

How is the working height set?

With the locking knob on the central column, tightened fully before the tray is loaded.

Can the side holders be removed?

Yes: they clip to the side of the tray and come off for cleaning or when the full tray surface is needed.

Which tools belong on the trolley for a bleaching service?

Bowl, mixer and brushes, with Nika Extreme Lift and the Activators side by side on the tray, so the ratio is mixed right at the chair.

How is it moved round the chair?

On its five castors, pushed by the column or by the tray edge.

Installation and care

Before the first use, check that the column is seated firmly in the base and that the locking knob holds the tray at the chosen height. Check the knob regularly and tighten it again if the column starts to drop under load.

Wipe the tray and the holders after every service, before colour or bleach dries; take the holders off for a thorough clean. Avoid abrasive pads and aggressive solvents. Keep the castors free of hair so the trolley rolls smoothly, and do not sit or lean on the tray.